| A |
Double Row Angular Contact Ball Bearing Without Filling Slots |
| 2RS1 |
Sheet Steel Reinforced Contact Seal Of Acrylonitrile-Butadiene Rubber (NBR) On Both Sides Of The Bearing |
| TN9 |
Injection Moulded Snap-Type Cage Of Glass Fibre Reinforced Polyamide 6,6, Ball Centered |
| C3H |
Internal. Play Upper Half C3 Range |
| WT |
Grease Fill For Low As Well As High Temperature e.g. -40°C/+160°C. WT Or A Two-Figure Number Following WT Identifies The Actual Grease. An Additional Letter Or Letter/ Figure Combination As Mentioned Under u201cHTu201d Identifies Filling Degrees Other Than Standard |
| DB31 |
Matched Bearings Pair Arranged Back-To-Back. A Figure Combination Immediately Following The DB Identifies The Design Of The Intermediate Rings |
